110550 MVP 3 Channel Standard Quick-Code™ Radio Receiver
|
|
The Allstar 110550 MVP Quick-Code™ standard 3 channel
radio receiver can be used for either the MVP remotes or the older
Allstar®, Allister® or Pulsar® code switch type remote controls that
operate on 318Mhz. This receiver can learn up to 8 different remote
codes and is easy to program by using the side mounted program
pushbutton. This receiver can replace the older Allstar, Allister and
Pulsar 822, 8822, 833, 8833, 933 and 9933 code switch type radio
receivers.
NOTE: This receiver is also available in 288Mhz as a special order. |
|
Click image for programming instructions |
Allstar MVP Standard 1 Channel Receiver
- Controls to to three door/gates
- Standard 3 tab connector
for middle door and wire leads to other two doors
- Accepts up to 8
different remote codes
- 8 inch wire lead antenna
- Easy to
program using the side mounted learn pushbutton
Specifications:
Power: 24V AC/DC
Frequency: 318 MHz
Dimensions: 6.375 x 3.375 x 1.375 inches
|
| 1-4
items |
5-9
items |
10-24
items |
25-49
items |
50-99
items |
100+
items |
| $49.95 |
$49.45 |
$48.95 |
$48.45 |
$47.95 |
$47.45 |
|
|
MVP 3 channel Standard Radio Receiver
Part number 110550 |
|
The Allstar 111968 MVP Quick-Code Receiver can replace the older
Allstar, Allister, Pulsar code switch type receivers. |
|
If you are not positive that
this is the correct item for you, please email us. We are more that
happy to assist you in determining the correct item for you. If you need
to contact us for assistance please have the Make and Model number of
the garage door opener, radio receiver or transmitter. We would rather
have you contact us than end up with the wrong item and have to return
it. |
