The LiftMaster 387LM Universal wireless
digital keyless entry gate or garage door opener keypad is directly
compatible with the most popular brands of remote controls used today. This
high quality and easy to program wireless keyless entry keypad is a brand
new addition to the LiftMaster product line. Features slide up protective
cover and back illuminated keypad keys for easy nighttime use. You can
program in your own 4 digit PIN number during the initial setup when setting
the compatible mode from the list of compatible devices listed below. Once
programmed entering your 4 digit pin number then the 0 key will activate the
device. The PIN number can easily be change anytime and does not require
reprogram the whole keypad for mode type. The LiftMaster 387LM Universal
wireless keypad is the same as the Chamberlain Clicker KLIK2U and the Sears
part number 139.53711 (also listed as 00953711000) keypad. Controls up to
one gate or garage door opener. This wireless digital keyless entry keypad
can be used with any of the brands of garage door openers or gate receivers
from the compatibility list below and can be change from one brand to
another if needed by reprogramming. This item is brand new and comes with
the mounting screws, battery (installed) and programming instructions.
The LiftMaster
387LM is the same keypad as the Chamberlain Clicker KLIK2U and Sears
Craftsman 139.53711 (also listed as 00953711000) and is directly compatible
with the following brands of garage door openers and receivers:
Linear Multi-Code or
Multi-Elmac 10 DIP on/off code switch manufactured since 1976 on 300Mhz.
Linear Delta3 or Moore-O-Matic 8 DIP on/off code switch manufactured
since 1976 on 310Mhz.
Stanley 10 DIP on/off code switch manufactured since 1976 on 300Mhz or
310Mhz.
Note: Some of the later models of Stanley garage door openers that used the
10 DIP code switches are on the 300Mhz Multi-Code frequency rather than the
more common 310Mhz frequency and this keypad can be set to either one.
Genie 9 or 12 DIP on/off code switch manufactured since 1985 on 390Mhz.
Linear Mega Code format used on LD030, LD050, LS050 garage door openers
manufactured since 1997 on 318Mhz.
Chamberlain, LiftMaster, Sears Craftsman, Master Mechanic, Raynor, True
Value, Access Master and Do-It models with 7, 8 or 9 code switch
manufactured since 1983 on 390Mhz.
Genie Intellicode or Overhead Doors Code Dodger manufactured since 1995 on
390Mhz or 315Mhz.
Stanley Secure Code manufactured since 1998 on 310Mhz.
Wayne Dalton rolling code manufactured since 1999 on 372Mhz.
Chamberlain, LiftMaster, Sears Craftsman, Master Mechanic, Raynor, True
Value, Access Master and Do-It models with Green, Orange, Red, Purple, learn
button manufactured since 1983 on 390Mhz or 315Mhz.
