The Multi-Code model 3022 is a wireless remote control gate opener safety edge transmitter with 10 DIP code switches on the 300MHz frequency. This MultiCode 3022 also know as the 302210 is now manufactured by Linear Corporation and the part number is MSC302210. The Multi-Code 3022 is compatible with all of the Stanley or Multi-Code brand radio receivers that can be set to the 300MHz frequency. The MultiCode 3022 is typically used as a wireless control from the gate to the gate opener that eliminates the need for a hard-wired cord between then that can be damage or vandalized. In a typical installation, the Multi-Code 3022 is mounted to the motorized gate, door or barrier arm and wired to the safety edge sensor (sold separately), which presents a closed circuit across the connecting wires when an object is hit by the safety edge sensor. The recommended radio receiver to use with the 3022 wireless safety edge remote control transmitter is the Multi-Code 109950 but if the gate opener is also being controlled by wireless remote controls, then it is recommended to use the two channel version radio receiver model Multi-Code 302850 to reduce interference between two separate radio receivers that would be in close proximity to each other. This Multi-Code 3022 is battery powered and the electronics enclosed in a weatherproof enclosure that has a gasket access cover and a compression sealing cord connector for the cable from the gate edge sensor. This is a brand new item that comes in a box and includes the battery, 4 mounting screws, cord connector and programming instructions.
PLEASE NOTE: This remote is a Multi-Code brand name remote control and is not a universal type of remote.
Activates one Multi-Code receiver for stop or reverse of gate
Eliminates the need of cable or coil cord from gate edge sensor to gate motor
Weatherproof enclosure with gasket cover
One-Year manufacturers warranty
Power: 9V battery (included)
Codes: 1,024 (set by dip switches)
Dimensions: 4.28 x 4.00 x 2.22 inches (excluding cord connector)
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for you. If you need to contact us for assistance please have the Make and Model number of the garage door opener, radio receiver or transmitter. We would rather have you contact us than end up with the wrong item and have to return it.